The taillight of a 2009 Pontiac Vibe is an important component of the car’s lighting system. Without a functional taillight, you are at risk of being pulled over by law enforcement. Replacing a taillight on a 2009 Pontiac Vibe can be a straightforward process if you have the necessary tools and a bit of mechanical knowledge. This article will provide a step-by-step guide on how to change a taillight in a 2009 Pontiac Vibe, from locating the taillight assembly to replacing the faulty bulb. With the instructions provided here, you can save yourself time and money by replacing the taillight yourself instead of visiting a mechanic.
The simplest way to maintain your vehicle’s tail lights is to replace them every now and then. Take a closer look behind the tail light lens as you open the trunk or tailgate. If you use nitrile gloves, you will be able to protect your bulb from damage caused by oils from your skin. The fourth step is to disassemble the assembly from your vehicle and align it with the body. Check that the screws or bolts are securely fastened. The sixth step entails rotating your vehicle’s sides to get to the other side of it. O’Reilly Automotive Stores, Inc. and its affiliates are not liable for injury or damage resulting from recreating the repair shown in this series.
Can I Replace My Tail Light Myself?
Replacing a tail light bulb on most vehicles is usually a simple matter of minutes. Depending on where the bulbs are installed, some models may require the tail light panels to be removed either inside the bootlid or the boot itself.
Nuts can be removed from threaded stud frames by using a deep socket and ratchet. To install the taillight, a new pair of bulbs must be inserted into the sockets. Parts are available for a low price on the Internet. The majority of these companies sell low-cost knock-offs of original equipment (OEM) parts offshore. If your vehicle’s taillights have not been replaced in two years, now is the time. threaded stud in the sheet metal and nuts fastened to the metal. The first method employs screws, as well as captive stud/socket fasteners.
Replacing a broken tail light bulb in a newer car can be a time-consuming and costly process. A simple bulb repair can cost anywhere from $20 to $100, but it can also cost a lot more if a lens, wiring, or new assembly is required. This type of repair is expected to cost between $200 and $2000 by 2022, depending on labor costs as well as the type of parts and equipment used. If you need light repair services, Walmart Auto Care Centers are a good place to go. As a result, you will not have to deal with the hassle of finding a reliable repair shop or the risk of overcharging for your repair.
Save Time & Money: Replace Your Tail Light Easily
The majority of drivers do not need to replace a faulty tail light on a regular basis. A replacement bulb will typically cost around $10, and the process will only take a few minutes. This is an excellent way to save both time and money. New car models, on the other hand, may be more complicated because they have more wires to disconnect. If you require assistance, AutoZone can assist you in locating the right products and providing suggestions. Furthermore, it is illegal to drive with a broken tail light because it is considered a minor traffic violation, which can result in a ticket.
How Do You Replace A Rear Tail Light Assembly?
Replacing a rear tail light assembly is a relatively easy task that can usually be completed in less than an hour. First, you will need to locate the tail light assembly under the rear of the vehicle. After that, you will need to unplug the wiring harness from the tail light and then remove the screws holding the assembly in place. Once the screws are removed, the tail light assembly can be carefully pulled out and the new one can be pushed in. Finally, reconnect the wiring harness and replace the screws, and you should be good to go.
If you have any of the listed reasons, it is a good idea to replace your tail light assembly. Tail light assembly replacements are usually a fairly simple process. If you decide to do the work yourself, you can expect to pay anywhere from $200 to $500. If you drive a high-performance or luxury vehicle, you may be required to do additional work. A straightforward guide to replacing a traditional tail light assembly with a mini bulb tail light. Because all vehicles have their own repair procedures, you should always refer to the application information for each. The information on this Website is for informational purposes only and should not be used in conjunction with a professional mechanic’s consultation.
How Much Does It Cost To Replace A Tail Light Assembly?
The average cost of replacing a Tail Light Cover is $50 to $300, depending on whether you take it to a mechanic or DIY. The price range you see here does not include taxes, fees, or the make or model of vehicle you are purchasing.
What Does A Tail Light Assembly Include?
The Tail Light Assembly, in its most basic form, is a collection of lights on the back of your vehicle. The tail lights, brake lights, and reverse lights all have lights in them. There is a specific purpose for each pair of lights when it comes to conspicuity at night.
Can Autozone Change Your Tail Light?
Although you won’t find brake light replacement services at AutoZone, our knowledgeable team will be glad to assist you with any questions you may have about the process, as well as help you find the right products to get started, or even assist you.
It is possible that an AutoZone store will be able to assist you in replacing your brake lights, tail lights, headlights, and other external vehicle lights. The firm does not advertise this service on its product line. Autozone can replace headlights, despite the fact that they do not provide mechanical services. You can find a large selection of replacement and high-performance bulbs for your vehicle, truck, or SUV at Pep Boys. With the help of this service package, headlights that have been hazed, dull, or yellowed can be restored to their original brightness and clarity. Replacing the entire assembly of a headlamp will cost between $250 and $700. A tail light bulb replacement should take no more than an hour and should not take longer than that. The tail light covers your tail lights without the need for adhesive films or paint to color them. With AutoZone’s tail lights, you can have one that is compatible with the make and model of your vehicle.
Does Autozone Change Lights?
For customers who need to replace their burnt-out headlights, only AutoZone can do so; the replacement must be purchased from the company and do not necessitate vehicle disassembly. Whether you need a simple replacement or a professional mechanic, AutoZone employees are available to assist you.
Pontiac Vibe Tail Light Cover Replacement
Replacing your Pontiac Vibe’s tail light cover is a relatively easy task that can be done with some basic tools and a few minutes of your time. The first step is to remove the existing tail light cover by unscrewing the four screws that hold it in place. Once the cover is removed, you can then install the new tail light cover. It is important to make sure that the new cover is properly aligned so that the tail light is properly visible from the rear of the vehicle. Once the new cover is installed, simply re-screw the four screws to secure it in place. With a few simple steps, you can quickly and easily replace the tail light cover on your Pontiac Vibe.
Can You Replace Just The Tail Light Cover?
The majority of times, a tail light cover replacement only involves replacing the tail light cover with limited screws, bolts, and/or nuts. Some broken bulbs may need to be replaced as well. This type of repair typically only takes an hour or two at a repair shop.
Don’t Risk It: Fix A Broken Tail Light Cover Now!
It is not only illegal to drive with a broken tail light cover, but it is also dangerous. It is possible that the tail light will not be visible to other drivers if the cover is cracked or broken, potentially resulting in a car accident. Furthermore, if a law enforcement officer sees a broken tail light cover while on patrol, he or she may issue a ticket or fine. The tail light cover should be replaced if it is damaged. This can be done relatively easily and at a reasonable cost. To cover the area if it is more severe, you could use lens repair tape. If you don’t have time or money to replace the cover, this is an excellent option for you. If you’re unsure where to get the tape, buy it from an auto parts store rather than a hardware store – the tape is designed to withstand the elements and will last a long time. Damage to a vehicle is not worth the risk of an accident or ticket if it is not extremely serious. If the tail light cover is worn down, you should replace it or use lens repair tape to repair it. Your safety and that of other drivers will be guaranteed if you drive in the proper lane.
How Do You Get A Tail Light Cover Off?
To remove the screws holding the lens cover in place, some cases you may need a Phillips, slotted, or star-shaped screwdriver. The lens cover should be gently removed. If the lens cover and light bulb holder are part of a two-piece unit, they must be replaced and reinstalled.
Brake Lights Made Easy At Autozone
We understand how important it is to keep your vehicle in good working order, so we offer brake light installation and repair services at AutoZone. We can provide all of the parts and expertise you require to have your tail lights replaced, despite the fact that we will not replace them for you. We offer a large selection of brake light components, from bulbs to wiring harnesses, and our knowledgeable staff is available to assist you. We also provide helpful how-to videos and installation instructions so that you don’t have to deal with anything. If you are looking for dependable brake light parts and advice, give us a call at AutoZone.
